United States | Change Country | Help
Bodybuilding.com Information Motivation Supplementation
 
in:

Beverly International Muscle Provider

Beverly International: Muscle Provider

Designer Protein Powder Blend for Building Muscle*

Promotes Protein Digestion and Absorption & Muscle Mass and Strength*


Beverly International Muscle Provider Product Guide

This "Designer" Protein may be the world's top.*

The original Muscle Provider (MP) formula was invented by nutritional ingredients researcher and Beverly International (BI) founder Jim Heflin in 1995 working in collaboration with a team of food scientists. It remains to date one of the world's top "designer" protein supplements. MP was designed to be an anabolically potent and convenient source of protein nutrition available to bodybuilding consumers.* Each 29-gram serving floods the body with 21 grams of high-quality proteins and more than enough of each amino acid required to synthesize protein in muscle and every other human tissue.*

Whey protein isolate (WPI) and whey protein hydrolysate (WPH), perhaps the most studied proteins in the world, comprise the bulk of MP.* Their quantities are considered exceptional by industry standards: MP contains more than 35 times as much WPI and nearly 10 times as much WPH as some products. To WPI and WPH have been added several other high-quality proteins including whey protein concentrate (WPC), calcium-bound caseinate, hydrolyzed lactalbumin and egg white. All of the milk proteins in the formula are obtained from fresh milk supplied by BSE-free cows born and raised in the United States subject to USDA guidelines.

Each protein in MP is characterized by its own amino acid profile, speed of digestion and absorption, and taste and mouthfeel. The combination and proportions of proteins in MP give it a taste and mouthfeel that no other company has been able to duplicate while also allowing it to dissolve, digest and absorb very easily.* MP is ready to begin stimulating protein synthesis, inhibiting protein breakdown and otherwise supporting your gains in muscle size and strength from training almost immediately. *

The top 3 personnel at the Muscle Provider manufacturing lab ("MP lab") possess more than 100 years of combined industry experience and include a PhD and analytical chemist. According to the NSF (www.nsf.org), the MP lab is compliant with both its GMP and GMP for Sport programs. This means that it has gone above and beyond the FDA's minimum requirements for a dietary supplement manufacturing facility and it does not produce any products with banned substances. NSF and FDA inspectors audit the MP lab regularly to ensure that it remains compliant.

The Quality Control team at the MP lab subjects each batch to at least half a dozen tests including Identity, Microbial, Protein Content, Content Uniformity, Mixing and Stability. These help to confirm that the product you purchase from BI contains the ingredients it is supposed to, is not contaminated, mixes properly and remains fresh, among other things. MP's ingredients are also specially blended so as to gently mix the proteins together without fracturing them, something overlooked by other companies.

Nutritionally, MP is ideal. It contains almost no lactose and zero sugar. It is also low in sodium. Whereas some other products may contain large amounts of salt (sodium chloride), through rigorous trial and error the MP lab discovered a particular balance of proteins that allowed them to reduce the level of salt in chocolate MP from 0.9% to 0.1%, a dramatic reduction that further supports muscle anabolism and hardness, as well as cardiovascular health.*

Since 1995, no one has been able to duplicate MP's delicious flavor system or identify its precise contents. Developed by the lab's R&D team over the course of at least five time- and labor-intensive rounds of audits, the flavor system is unusual in many regards. For instance, whereas other protein supplements contain added "filler" ingredients in order to address taste, texture and/or mixability issues, BI has chosen to conquer these challenges by adding more high-quality proteins in particular combinations. This has resulted in a product that consumers and food industry experts feel is truly superior in terms of its protein density, flavor and ease with which it goes into solution.*

Can consumers actually notice the difference between MP and a lower-quality protein supplement as far as how it affects the size and strength of their muscles? Yes. Numerous factors determine the quality of the protein and non-protein ingredients in the supplements that you consume, including the manner in which they are manufactured. Higher-quality manufacturing methods yield proteins with superior bioavailability. This means that more of each serving can be absorbed by your body, and in some cases, more quickly.* This directly impacts the anabolic state of your muscles.*

There are numerous qualities, or grades, of proteins. BI instructs the MP lab to use only the highest grades available. This is accomplished by purchasing its proteins from the same suppliers. Consumers benefit by getting the same exceptional anabolic potency, taste and mouthfeel with each bottle of MP that they purchase.* All stages of manufacturing are closely monitored by the Quality Control team to ensure that this remains the case.

Muscle Provider (MP) Frequently Asked Questions

1. How does MP taste?
Many consumers regard MP as the most delicious protein supplement available. Vanilla MP has a mouthfeel similar to soft-serve ice cream. Its flavor hints of sugar-coated almonds and pecans. Chocolate MP tastes like freshly made chocolate cupcake batter. The unique balance of protein and non-protein ingredients in the MP formula ensures that consumers will experience no undesirable aftertaste when using either flavor. No other company has managed to duplicate the outstanding taste of MP or identify the ingredients in its proprietary flavor systems. Several time- and labor-intensive rounds of flavor audits were required before the product was actually finalized.

2. Does MP need to be taken with food?
No. MP is intended to be taken on an empty stomach. For the best results it should be mixed with water. This will ensure that it is digested, absorbed and used in the synthesis of muscle protein to the best of its ability.* Use either a blender or a shaker cup to prepare. Adjust the level of water to suit your preference for a thicker or thinner protein shake.

3. How long can I take MP?
MP can be used every day as a protein supplement to the diet. Before using any dietary supplement it is recommended that you consult with your medical doctor.

4. What makes MP different from other protein supplements?
a. Content of WPI and WPH: By industry standards, the quantities of whey protein isolate (WPI) and whey protein hydrolysate (WPH) in MP are considered exceptionally high. MP contains more than 35 times as much WPI and 10 times as much WPH as some protein supplements.

b. Protein Density: Each 29-gram serving of MP supplies a total of 21 grams of high-quality proteins. That's 72.4% by weight. By comparison, a large white egg is only 12.1% protein and a glass of milk comes in at about 3.3% protein. MP's "protein density" (i.e. protein per gram of product) exceeds that of other products by 25% or more. For instance, some top-selling protein powders contain only 50% protein by weight.

c. Digestion and absorption: The unique combination and proportions of proteins in MP allow the product to be very easily digested and absorbed without the need for digestive enzymes.* Consumers will be happy to find that it does not produce a feeling of heaviness or bloating after consumption.*

d. Flavor: The MP flavor systems are developed only for BI on an as-needed basis. They are not used by any other company in the world.

e. MP manufacturing lab: The top 3 personnel at the lab where MP is manufactured possess more than 100 years of combined industry experience and include a PhD and analytical chemist. According to the NSF (www.nsf.org), the MP lab is compliant with both its GMP and GMP for Sport programs. This means that it has gone above and beyond the FDA's minimum requirements for a dietary supplement manufacturing facility and it does not produce any products with banned substances. NSF and FDA inspectors audit the MP lab regularly to ensure that it remains compliant.

f. Testing: All of the proteins found in MP have been evaluated in clinical studies using human subjects. The anabolic benefits of whey and casein, in particular (e.g. stimulation of myofibrillar protein synthesis, increase in muscle size and strength), are well-documented.* In addition, the Quality Control team at the MP lab puts each batch of product through at least half a dozen tests including Identity, Microbial, Protein Content, Content Uniformity, Mixing and Stability. These help to confirm that each bottle of MP contains the ingredients it is supposed to, is not contaminated, mixes properly, and remains fresh and anabolically potent.

g. Blending: The ingredients in MP are specially blended so as to gently mix the proteins together without fracturing them. Fractured proteins can quickly become rancid.

h. Fresh milk from US cows: The milk proteins in MP are obtained from fresh milk supplied by cows born and raised in the US and subject to USDA guidelines. The cows are also free of BSE, meaning that they are not contaminated with the biological agent believed to cause bovine spongiform encephalopathy.

i. Cross-Flow Ultra-Filtration: The original MP formula was invented by nutritional ingredients researcher and BI founder Jim Heflin in 1995 in collaboration with a team of food scientists. After exhaustive research, Heflin and his scientists determined that cross-flow ultra-filtration (CFUF) was the best method with which to extract whey proteins from milk. Numerous precautions are taken during CFUF so as to avoid harming the whey proteins. At no point in the process are they exposed to excessively high heats, for instance. Heflin's decision to use expensive cross-flow ultra-filtered WPI was considered "bleeding-edge" -so far ahead of its time that it boggles the mind of industry veterans even today. It also shows how strongly he was committed to manufacturing products with only the highest-quality ingredients available no matter what the cost, a practice BI continues to this day.

j. Low in lactose: CFUF removes the low molecular weight compounds such as lactose ("milk sugar") from whey. The result is that MP is exceptionally low in lactose and therefore ideal for consumers with a deficiency of lactase, the enzyme that digests this sugar in the digestive tract. The WPI in MP contains only 1.5% lactose -barely over 100 mg per serving. WPC also contains only small amounts of lactose. When Heflin invented MP in 1995 it was considered the lowest lactose formula available.

k. Low in fat: CFUF also removes much of the fat from whey. MP's WPI contains less than 0.2% fat. Each serving of MP contains only 1 gram of total fat per serving.

l. Low in sugar: Each serving of MP contains only 1 gram of sugar. It is very difficult for consumers to find a product as dense with protein and as low in sugar and fat as MP.

m. Low in sodium: In an effort to maximize MP's muscle anabolic potency and overall health benefits, BI insists that its lab keep the level of sodium in the product low.* Salt (sodium chloride) is often used in chocolate formulations to enhance the flavor profile. Through rigorous trial and error, the MP lab discovered a particular balance of WPH and WPI that allowed them to reduce the level of salt in chocolate MP dramatically -from 0.9% to 0.1%- while leaving alone its addictive flavor.

n. No "filler": Non-protein ingredients ("filler") may be used during the manufacturing of protein supplements in an effort to address flavor issues. This is more likely to be the case with chocolate-flavored products. Adding such ingredients reduces the protein density, resulting in a product of inferior quality. Through intensive trial and error, BI managed to develop a delicious tasting chocolate by using a particular combination of proteins. This has the added benefit of making MP even more protein dense and anabolically potent.*

5. Does MP have any undesirable side effects?
When MP is used as directed, consumers typically do not experience any undesirable side effects.

6. If I don't perform resistance exercise, can I still benefit from using MP?
Yes. The proteins in MP may still support muscle mass and strength and provide other benefits whether or not you currently engage in a regular program of exercise.* For instance, consumption of whey protein hydrolysate (WPH) has been suggested to stimulate muscle protein synthesis even at rest.* However, you can expect far greater benefits when using it as a supplement to a regular program of exercise and a diet supplying an appropriate amount of calories.* Because resistance exercise is more efficient at stimulating muscle protein synthesis, you can expect greater gains in muscle mass, strength, shape, tone and definition when using MP in conjunction with this type of exercise, in particular.*

7. What are the potential benefits of supplementing my diet with MP?
MP contains ingredients that published scientific studies suggest can*:

  • Promote protein digestion & absorption*
  • Promote essential and non-essential amino acid levels*
  • Support nitrogen balance*
  • Support Insulin-like Growth Factor-1 (IGF-1) levels*
  • Stimulate muscle protein synthesis*
  • Stimulate muscle fiber hypertrophy (increase in fiber size)(both type 1 and 2 fibers)*
  • Promote muscle mass & strength*
  • Reduce exercise-induced muscle damage*
  • Support cognitive performance & mood*

8. Is MP safe for people with medical conditions?
It is advised that you discuss this product with your medical doctor before using if you have a medical condition or if you are currently unaware of your health status.

9. Is MP safe if you are trying to become pregnant, or are currently pregnant or nursing?
Discuss MP with your medical doctor before using if you are trying to become pregnant, or are currently pregnant or nursing.

10. Can MP be used while preparing for a bodybuilding competition? What about a fitness or figure competition?
Yes. MP is ideal for athletes who are preparing for any type of physique competition. It is exceptionally protein-dense as well as being low in fat, sugar and sodium.

11. Can MP be "stacked" (combined) with other BI products?
Yes. Contact the BI customer service team for help in developing a supplement stack that will help you achieve your physique and performance goals with a minimum of difficulty.*

12. Lactose is a sugar and therefore a carbohydrate. If MP is so low in lactose, then why does it contain 3 grams of carbohydrate per serving?
Each 29-g serving of MP contains 3 g of total carbohydrate, including 1 g of fiber. Much of the non-fiber carbohydrate consists of maltodextrin, which has been added to improve the mixability of the product.

13. Why is there cocoa in MP?
Cocoa powder is one of the most prominent flavor ingredients in chocolate MP. The MP lab also uses a natural chocolate flavor that is said to be the most incredible tasting of its kind.

14. Why does only the chocolate flavor of MP contain caseinate and lactalbumin?
Chocolate protein supplements often require the addition of more flavor ingredients to compensate for the undesirable taste of proteins. However, as discussed above, the addition of non-protein flavor ingredients reduces the protein density of the product, something BI considers unacceptable. After considerable trial and error the MP lab discovered a particular balance of caseinate and lactalbumin that allowed them to achieve a great-tasting product with a high protein density.

15. What are the gums in MP for?
MP contains acacia gum and guar gum. Both are water-soluble, viscous-forming fibers. ("Viscous-forming" essentially means that the gums create a thick solution when they are added to water.) Acacia gum, also known as gum Arabic, is considered to be the oldest and best known of the natural gums. Obtained from several species of the Acacia tree, it has been in use since at least the time of the early Egyptians. Guar gum is obtained from the seeds of the guar plant, Cyamoposis tetragonolobus, grown for centuries in India and Pakistan. Acacia gum and guar gum serve as thickening agents in MP and help keep its proteins from settling to the bottom of your glass when they are mixed with water.

16. What is the soy lecithin in MP for?
Lecithin is used to enhance the mixability and taste of the product.

17. How long can MP stay fresh?
If it is kept tightly sealed in a cool, dry place, then MP can last several years.

18. Can I mix up MP with water and store it in the fridge for later?
No. MP is intended to be consumed immediately after mixing. If it is left in the fridge after mixing with water, then it will become very thick due to the action of the gums.

19. Where is MP made?
The MP formula was developed at the BI head office in Cold Spring, Kentucky. The finished product is manufactured at a 45,000 square foot facility (the MP lab) that is compliant with the NSF's GMP and GMP for Sport programs.

The statements on this page have not been evaluated by the FDA. This product is not intended to diagnose, treat, cure, or prevent any disease.

Beverly International Muscle Provider Purchase Information

Order today using our 100% secure server and get it at the lowest prices in the world with our fast, inexpensive 2-3 day shipping! NOBODY beats our overall price!


870 Grams $46.50 $40.79
Flavor Taste Availability  
Chocolate
9.6 In Stock
Vanilla
9.6 In Stock

Recommended For You


Do You Use This Product?

Beverly International: Muscle Provider
Add To Your BodySpace



870 Grams $46.50 $40.79
Flavor Taste Availability  
Chocolate
9.6 In Stock
Vanilla
9.6 In Stock
What's in Beverly International Muscle Provider?
870 GramsChocolate
Supplement Facts
Serving Size:1Scoop(29g)
Servings Per Container:About 30
Amount Per Serving% DV†
Calories110
Calories From Fat10
Total Fat1g2%
Cholesterol10mg3%
Total Carbohydrate3g1%
Dietary Fiber1g4%
Sugars1g**
Protein21g40%
Calcium120mg12%
Iron0.8mg5%
Sodium180mg8%
Potassium350mg10%
Muscle Provider Whey Protein System™25.6g**
(Whey Protein Isolate,Whey Protein Hydrolysate,
Whey Protein Concentrate, Calcium Caseinate,
Hydrolyzed Lactalbumin, Egg White)
** Percent Daily Values are based on a 2,000 calorie diet.
† DV not established.
Ingredients
Cocoa Powder, Guar Gum, Natural And Artificial Flavor, Sodium Chloride, Soy Lecithin, Acacia Gum, Acesulfame Potassium, Sucralose.
Allergen Information:
Contains Milk, Soybean, Egg.

Directions For Muscle Provider:

To make a delicious shake:

  • Pour 8 oz of cold water into a blender or the container of your choice
  • Add 1 scoop of Muscle Provider and blend or mix until the texture is smooth or as you desire it.
  • Drink and enjoy!
  • For a thicker, sweeter shake, reduce the amount of water slightly. Adding 3-4 small ice cubes when blending will also increase thickness.
  • For a thinner shake, add more water.

The best times to use Muscle Provider are:

  • Within 1 hour before and/pr after lifting weights (resistance exercise)
  • fisrt thing in the morning
  • before bed
  • any other time of day to increase your daily protein intake

Warnings: Use this product as a dietary supplement only. Do not use for weight reduction or as your only source of calories.

* These statements have not been evaluated by the Food and Drug Administration. This product is not intended to diagnose, treat, cure, or prevent any disease.
Give Us Feedback:
Report A Problem
Site Feedback
Follow Us:
Twitter
Facebook
RSS Feeds