Powertec Strength Olympic Weight Rack (USA Orders Only) - Out Of Stock

Built to hold hundreds of pounds of weight, this weight rack was made to last. The rack is built using 2 ?" tubing, not the inexpensive flat bar so typically seen. The Strength Olympic Weight Rack looks and functions like any weight rack you would find in a gym. Each weight horn is covered with a PVC sleeve to prevent scratching.

Frame Construction:
All Powertec frame structures are mig welded and consist primarily of 2 1/2" square along with 3"X 3" rectangular steel tubing raging from 2.0 to 2.5 mm or 12 gauge wall thickness.

Upholstery:
Pads are constructed of 2 1/2" thick, high density foam surrounded by top grade industrial upholstery for a firm, contoured feel. Pads are double stitched and incorporate a backing to provide a long life.

Hardware:
Hardware components such as 1/2" nuts, bolts, washers, and knobs are all high tensile strength to withstand heavy usage and stress.

Component Parts:
Parts such as 1/4" nylon coated aircraft cable, 4" ball bearing nylon reinforced pulleys, linear bearings, pillow block bearings, bushings and spring loaded pop pins are all industrial grade to ensure a smooth and quiet operation.

Packaging:
Each part is carefully wrapped and protected inside an extra strength seven layer corrugated box designed to minimize damage during shipping. Each product includes an owners manual detailing product and assembly procedures.

Finish:
Steel frame structures are thoroughly cleaned and treated. They are then finished with a hard, durable baked on powder coating that will last a lifetime.

Testing:
Weight capacities are tested to a recommended safe range based on maximum load usage. WARNING! DO NOT EXCEED THE SAFE CAPACITY LIMIT.